adafruit_tcs34725
¶
CircuitPython module for the TCS34725 color sensor. Ported from the micropython-adafruit-tcs34725 module by Radomir Dopieralski: https://github.com/adafruit/micropython-adafruit-tcs34725
See examples/tcs34725_simpletest.py for an example of the usage.
- Author(s): Tony DiCola, Carter Nelson
Implementation Notes¶
Hardware:
- Adafruit RGB Color Sensor with IR filter and White LED - TCS34725 (Product ID: 1334)
- Flora Color Sensor with White Illumination LED - TCS34725 (Product ID: 1356)
Software and Dependencies:
- Adafruit CircuitPython firmware for the ESP8622 and M0-based boards: https://github.com/adafruit/circuitpython/releases
- Adafruit’s Bus Device library: https://github.com/adafruit/Adafruit_CircuitPython_BusDevice
-
class
adafruit_tcs34725.
TCS34725
(i2c, address=41)[source]¶ Driver for the TCS34725 color sensor.
-
active
¶ The active state of the sensor. Boolean value that will enable/activate the sensor with a value of True and disable with a value of False.
-
color
¶ Read the RGB color detected by the sensor. Returns an int with 8 bits per channel. Examples: Red = 16711680 (0xff0000), Green = 65280 (0x00ff00), Blue = 255 (0x0000ff), SlateGray = 7372944 (0x708090)
-
color_raw
¶ Read the raw RGBC color detected by the sensor. Returns a 4-tuple of 16-bit red, green, blue, clear component byte values (0-65535).
-
color_rgb_bytes
¶ Read the RGB color detected by the sensor. Returns a 3-tuple of red, green, blue component values as bytes (0-255).
-
color_temperature
¶ The color temperature in degrees Kelvin.
-
cycles
¶ The persistence cycles of the sensor.
-
gain
¶ The gain of the sensor. Should be a value of 1, 4, 16, or 60.
-
glass_attenuation
¶ The Glass Attenuation (FA) factor used to compensate for lower light levels at the device due to the possible presence of glass. The GA is the inverse of the glass transmissivity (T), so GA = 1/T. A transmissivity of 50% gives GA = 1 / 0.50 = 2. If no glass is present, use GA = 1. See Application Note: DN40-Rev 1.0 – Lux and CCT Calculations using ams Color Sensors for more details.
-
integration_time
¶ The integration time of the sensor in milliseconds.
-
interrupt
¶ True if the interrupt is set. Can be set to False (and only False) to clear the interrupt.
-
lux
¶ The lux value computed from the color channels.
-
max_value
¶ The minimum threshold value (AIHT register) of the sensor as a 16-bit unsigned value.
-
min_value
¶ The minimum threshold value (AILT register) of the sensor as a 16-bit unsigned value.
-